Tag Archives: Wiring Matters

Wiring Matters Issue 84 – March 2021

Leave a Reply

It’s time to take a look what’s inside Issue 84 (March 2021) of Wiring Matters.

Estimating the age of an electrical installation

This article by Richard Giddings (IEng MIET ACIBSE) looks at how useful it is to be able to establish the approximate age of an electrical installation, whether needing this information for reporting purposes, work or just plain curiosity. Electrical testing alone is insufficient to give an installation’s exact age although, in some instances, it can assist. Instead, recognizing certain details will be a great skill which can be honed by experience.

Island mode earthing arrangements: New Guidance in the Second Edition of the IET Code of Practice on Electrical Energy Storage Systems

Introducing the concept of prosumer’s electrical installations (PEIs), and operating modes for a electrical energy storage systems (EESS) and examining the earthing arrangements for island mode operation for PEIs with EESS. By Graham Kenyon CEng MIET and Dr Andrew F Crossland CEng PhD.

The all-new 5th edition of the IET Code of Practice for In-Service Inspection and Testing of Electrical Equipment

In this article, James Eade, author of the 5th edition, continues his brief insight into the changes to this important Code, now available from the IET.

Broken PEN

Don’t panic, this article is not about broken ballpoint pens, it is concerning broken PEN conductors in PME earthing arrangements. By Michael Peace CEng MIET.

The history of colour identification of conductors

We consider identification of conductors by colour as the norm today, but it wasn’t always the case, as prior to 1916 conductors were not typically identified by colour. By Michael Peace CEng MIET.

What’s in Wiring Matters Issue 83 [November 2020]

Leave a Reply

Let’s take a look at what you can find in Issue 83 of Wiring Matters (November 2020)

The impact of Amendment 2 of the 18th edition (BS 7671:2018+A2:2022)

In this article, we look at the impact that some of the proposed changes in the draft for public comment (DPC) will have on electrical installations. We focus on Chapter 42, Chapter 44 and the new Chapter 82.

COVID-19 and how it has changed the way we work

Steven Devine talks about some of the effects that COVID-19 has had on the industry.

Current-carrying capacity of cables installed in concrete cable troughs

A discussion regarding the maximum number of cables that can be installed in a pre-formed concrete cable trough?

How I became a Chartered Engineer

Michael Peace shares his experience of becoming a Chartered Engineer.

Section 514 identification and notices in the Amendment No. 2 Draft for Public Comment

The draft for public comment (DPC) of Amendment No. 2 to BS 7671:2018 contains proposed changes to Section 514 Identification and notices. This article provides an overview of those proposed changes, and the reasons behind them.

Sponsored: Surge Protection – what you need to know

Surge protection devices (SPD) are a requirement under the 18th Edition of the Wiring Regulations and essential in protecting equipment from damage. Here, Dominick Sandford, Director and Head of Merchandising & Marketing at ElectricalDirect explains the requirements.

Wiring Matters – Issue 81 – July 2020

Leave a Reply

Wiring Matters – Issue 81 – July 2020

Here is what you will find in the July 2020 (Issue 81) of the IET Wiring Matters magazine.

History of insulation resistance testing

There has been a lot of activity on the IET Engineering Communities forum recently regarding the background of the 1 megohm minimum value for insulation resistance. Let’s take a look at how this value was arrived at in BS 7671:2018+A1:2020.

Draft for Public Comment: IET Code of Practice for Electrical Energy Storage Systems, 2nd Edition

The IET are happy to announce that the Draft for Public Comment for IET Code of Practice for Electrical Energy Storage Systems 2nd Edition is now live.

This Code of Practice looks at Electrical Energy Storage System (EESS) applications and provides information for practitioners to safely and effectively specify, design, install, commission, operate and maintain a system. This 2nd Edition has been updated to take account of developments in the industry, and progress in standardisation.

The all-new 5th Edition of the IET Code of Practice for In-Service Inspection and Testing of Electrical Equipment

In this article, James Eade, author of the 5th Edition, gives a brief insight into the changes to this important Code, due for publication later this year.

Amps per Pound

The idea of sizing a cable to reduce energy loss in distribution is nothing new and has been considered for many years, but with competitive tendering for work and the continual search for cost reductions (also known as ‘value engineering’), the modern design of an electrical installation tries to reduce the materials utilised to a minimum.

Asbestos guidance for electricians

Asbestos was widely used in building construction, both as a building material and for its useful insulation and fire protection properties, for many years during the 20th century.

Its use was progressively reduced between the 1970s and 1999 when all remaining forms were finally prohibited in the UK with the implementation of the Asbestos (Prohibitions) (Amendment) Regulations 1999. Asbestos has also been removed from various properties over the years for various reasons, for example, because of damaged material, or for refurbishment and demolition, but a substantial proportion of the original products still remain. These materials, if undetected, can present an ongoing risk to workers carrying out building repair and maintenance or improvement and refurbishment work. Workers at potential risk include electricians and other building trades. 

Wiring Matters – Issue 79 – March 2020

Leave a Reply

Issue 79 (March 2020) of Wiring Matters includes articles on Amendment 1 to BS 7671, the private rented sector, the Electrotechnical Assessment Specification and the return of our Mythbusters column.

Amendment number 1 to BS 7671:2018+A1

Amendment 1 of BS 7671:2018 was published at the beginning of February this year and may be implemented immediately. The amendment concerns Section 722 of BS 7671:2018 (electric vehicle charging installations). In this article, we give a brief overview of some of the main changes to Section 722.

The Electrotechnical Assessment Specification – January 2020 Edition

The Electrotechnical Assessment Specification (EAS) Committee is made up of a wide range of experts who are passionate about the electrotechnical industry. It includes representatives from the competent person scheme providers, certification and registration bodies, industry trade associations, the Ministry of Housing, Communities and Local Government, the Health and Safety Executive, Electrical Safety First and the IET (which also provides administrative support to the committee).

Mythbuster #5 – Will any old terminal block do?

In this issue, James Eade investigates terminals and connectors.

The Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020

Between 17 February and 16 April 2018, the government invited comments on the Electrical Safety Standards Working Group’s decision to make a recommendation to introduce mandatory inspection and testing for private rented properties.

Getting important labelling right leaves a lasting impression

What you leave behind after an installation speaks volumes. While electrical labelling is most importantly about safety, it should also be convenient, professional, time-saving, making your life easier and leave a lasting impression with your customers.

You can read the full story’s here

Wiring Matters – Issue 77 September 2019

Leave a Reply

Lets take a look at what was in Wiring Matters – Issue 77 September 2019

Brief introduction to the deployment of medical IT systems

Patients undergoing acute care in healthcare establishments (such as hospitals) require enhanced reliability and safety of the electrical installation as well as the safe and reliable operation of the medical electrical (ME) equipment used. This is to provide security of supplies and minimize the risk of electric shock.

BS 7671:2018 Frequently Asked Questions

The IET’s technical helpline receives a wide range of frequently asked questions. Here are just a few of the common questions received.

Setting the Standard

This article explores a brief history of standardization, the current process of standardization and why it is so important for our industry today.

IET announces new amendment to BS 7671 (IET Wiring Regulations)

The IET has announced a new amendment to BS 7671:2018 (IET Wiring Regulations 18th Edition). The national Wiring Regulations committee, JPEL/64, today agreed the publication of Amendment 1, which will consist of a stand-alone update to Section 722: Electric Vehicle Charging Installations.

Solar & Storage Live

The IET are pleased to announce that they are partnering with Solar & Storage Live again this year (17th – 19th September, NEC Birmingham).

Which RCD Type?

Residual Current Devices (RCDs) are safety switching devices. They are designed to provide safety for three types of protection, this section takes a look at them.

Setting the Standard continued, A-Deviations

In the previous article (Setting the Standard- Issue 77) they briefly described the process of standardisation from international to national level. One area that they did not discuss in detail relates to a situation a national committee is faced with when an EN or HD cannot be implemented at national level.